On the website, go to Systems in the left menu.Click on: AddYou will now see an activation code that is only valid for 10 minutes. Pairing the UNii On the control panel, go to “Menu”, scroll down and choose “Settings” choose “mySmartControl”.Switch on connecting to mySmartControl, to do this press the function button “On” and then connect the panel via the function button “Connect”. Enter the 6-digit code obtained in point 1.The UNii will now [...]

No. Because the alarm system connects to the cloud service, setting up port forwarding is not necessary. However, if it concerns a company network, it can happen that your IT department does not allow devices to communicate 'outside' as standard. In that case, inform the department that your alarm system must be able to exit freely via TCP port 10042.

Currently supported: the UNii and the AlphaVision ML and XL. Minimum requirements The UNii must have at least firmware version 1.0.The AlphaVision ML control panel must have at least firmware version V4.00 (released on 14-04-2016).The AlphaVision XL control panel must have at least firmware version V3.00 If the control panel has an older firmware version, it must first be flashed with the most recent firmware version. If Alphatool software is used for flashing, always use [...]